Inflatable and squirting dildos
How to choose an inflatable squirting dildo
The correct sequence is always the same: fill the reservoir, lubricate with a water-based product, insert the shaft deflated, inflate one pump at a time and stop when the pressure becomes distinct, use the squirt whenever you like, and deflate completely before removing. Inflated, the piece won't come out, and forcing it causes injury.
The reservoir should be filled with liquid designed for the purpose or water-based lubricant diluted with lukewarm water. Oils, creams and thick products clog the channel and aren't suitable for mucous membranes.
Straight after use: run lukewarm water through the channel until it comes out clear, push air through to empty it, wash the outside with mild soap, dry it upright and store it deflated and lying flat.
Can it be removed while inflated?
No, never. When inflated, the diameter is far larger than at insertion, and forcing it out causes injury. Press the valve, wait for the shaft to return to its original size, check it with your hand and only then withdraw slowly. For this reason it's a good idea to test the release with the toy empty before each use: if the valve doesn't deflate it quickly, don't use the piece.
Do the two systems work together?
They're independent: one bulb inflates the internal chamber, while a separate tube carries the liquid to the tip. So you can inflate without squirting, squirt without inflating, or use them in sequence. It's worth testing both empty in the sink before you start, so you know how much pressure each control needs and don't find yourself hunting for the right valve at the wrong moment.
What liquid goes in the reservoir?
Fake semen designed for sex toys, or water-based lubricant thinned with warm water until fluid. Oils, creams and any thick or food product are ruled out: they clog the tube and aren't suitable for contact with mucous membranes. Fill it shortly before use, use small amounts and never leave liquid in the circuit between sessions.
How do you wash the two circuits?
Straight after use, before the liquid dries. Run clean warm water through the squirting channel several times until it comes out clear, then pump air through to empty it and leave it to dry upright with the tip pointing down. The inflation chamber is sealed and must not be filled with water: clean only the outside. Wipe the bulb and tubes with a damp cloth and mild soap, then dry them.
Are they suitable for anal use?
Only with a wide, flared base, and with even more care than usual: once inflated, the dildo can't be removed quickly, so the stop at the base is essential. Use plenty of dedicated lubricant, insert with the shaft deflated and increase the pressure in small steps, stopping at the first sign of discomfort. Always remember to fully release the valve before withdrawing.
